- The machine has a regulated steel arm, that can slide forward or backward.
- The rotating blade, placed on the arm, is set in motion by an electric motor.
- The cylindrical thickness is put on the same arm and it can be adjusted
By the regulation of these three pieces, it is possible to vary the peel's height and consistence.
The machine stops in slope by a security microswitch. The workman can stop the apparate by moving manually the arm on right side and taking fall down it.
The Peeler machines are assembled on a painted iron base optional, but they can be furnished without also.
- Peeling : up to 3 Fruits a minute
Yield: up 66%
Reduced labor costs
Stainless steel construction and food grade materials
Blade changed in few minutes
No fruits grading required
1/5 mm. adjustable peel thickness
Total wash down components.
Polythene Chopping Board (Food) :
Ideal for the removal of the two parts (upper and lower) of skin remaining after peeling.
Also used to cut or cube difficult products such as pumpkin (max length mm. 400).
Technical characteristics:
- Polythene cutting board size: mm. 400x500x20h.
- AISI 304 stainless steel blade length mm. 400
- AISI 304 stainless steel blade thickness: mm. 30
- Total weight : kg. 5.250
The cutting board is equipped with no. 2 stainless steel bearings for blade rotation (bottom to top)
1 stainless steel bearing for blade rotation (right to left and vice versa).
N.B. A pair of safety steel gloves is supplied.
Technical characteristics:
|
|
Height: |
1000 mm. |
Width: |
700 mm. |
Depth: |
520 mm. |
Power installed; |
0,3 Kw |
Duty voltage: |
220/240V 50Hz monophasic |
Power supply voltage: |
24 V |
|